Product Catalog

  • Manufacturer: Garrett Metal Detectors
  • SKU: 51-110
  • Model Number: ACE350
  • Enhanced Iron Resolution™: allows more control of iron discrimination levels; helps separate good targets from adjacent junk iron.

  • Powerful new Double-D searchcoil: provides greater detection depth and performance in mineralized grounds and excellent scanning coverage.

  • Higher Frequency: offers improved ability to detect both small (i.e. small gold nuggets) and large targets

  • Volume Control Headphones: included with purchase

  • Electronic Pinpointing: to precisely locate target and speed recovery

Rental Rates
  • 24 Hour
    $40.00
  • Half Day
    $25.00 minimum
  • Day
    $35.00

  • Manufacturer: Bon Tool
  • SKU: 08-004

The Tile Nipper is our recommended hand tool for cutting glazed ceramic tile up to 3/8-inch thick and can also be used for cutting most varieties of stone, porcelain and dinnerware. However, the tile nipper should not be used for glass tile because it crushes and splinters more glass than it cuts.

Rental Rates
  • 24 Hour
    $15.00
  • Half Day
    $12.00 minimum
  • Day
    $12.00

  • Manufacturer: Bon Tool
  • SKU: 08-012
  • All steel design with rubber grip handle
  • Blade Holder can be reversed to make cuts next to the wall
  • Adjusts in and out for different heights
Rental Rates
  • 24 Hour
    $12.00
  • Half Day
    $10.00 minimum
  • Day
    $10.00

  • Manufacturer: Felker
  • SKU: 08-005
  • Model Number: TS-40

Cutting floor tiles should not be a hard job if your using the Felker TS-40 Rubi Tile Cutter. It is a professional tile cutter that features a built in separator that cuts maximum length of 17 inches. Its arrangement steel designed to reinforced maximum durability and rigidity.

And the operating principle behind the design is the double walled anti-shock ability to control cut by keeping the tile stationary and lowering vibration from the blade. It makes a series of steady slow cuts working deeper into the tile body with each cut.

Rental Rates
  • 24 Hour
    $30.00
  • Half Day
    $20.00 minimum
  • Day
    $25.00

  • Manufacturer: General Equipment
  • SKU: 08-009
  • Model Number: FCS10

The FCS10 RIP-R-STRIPPER® is a highly productive solution for removing a wide range of floor covering materials found on both commercial and DIY projects. Its small size and light weight design makes it highly productive in hard to reach areas such as bathrooms, closets and foyers. The detachable operator handle allows for easy transport in today’s smaller vehicles. Enhanced operator ergonomics and precise balance allow the FCS10 to work circles around larger stripper machines that lack the same agility and maneuverability. A wide range of straight and scoring type blades up to 10 inch cutting width are available for use on wood and concrete surfaces.

Rental Rates
  • 24 Hour
    $75.00
  • Half Day
    $35.00 minimum
  • Day
    $60.00

  • Manufacturer: Taylor Tools
  • SKU: 08-007
  • Model Number: 462

A. Push Plate
Contributes to operator comfort

B. Blade Angle Adjustment
Lets you dial in the precise angle you need of maximum stripping production

C. Flex-Weight
Remove supplementary weight for faster speed. 
Add weight for extra-front force for more difficult removals.

D. Locking Mechanism
Secures blade angle after adjustment

E. Articulating Suspension
Keeps blade engaged to the floor at all times

F. Ball Bearing Construction
For quieter, more dependable operation

Rental Rates
  • 24 Hour
    $90.00
  • Half Day
    $45.00 minimum
  • Day
    $75.00
Purchase Price
  • $499.00

    *RENTAL ITEM FOR SALE!!!

  • Manufacturer: Mi-T-M
  • SKU: 08-003
  • Model Number: MV-1300-0MEV

Motor:  Quiet operation · Self-cooling motor design

Components: Exhaust air ducting reduces the possibility of motor contamination by dirt or moisture · 25-foot electrical cord · Electrical cord wrap · Recessed wheels and clamps · Filter efficiency 99.5% to 1.0-micron (optional HEPA filter 99.7% to 0.3-micron) · Drain outlet · High impact poly construction canister with lifetime canister warranty · Industrial-grade polyolefin wheels with stainless-steel shafts

Miscellaneous: Stackable design for easy storage ·  Filter decreases airborn particles through exhaust · CSA certified · Hydro flow filter for wet or dry applications - no conversion necesary

Accessories (each unit includes): 10-foot x 1 1/2-inch crushproof hose · 2-piece aluminum extension wand · 14-inch commerical squeegee

Rental Rates
  • 24 Hour
    $35.00
  • Half Day
    $20.00 minimum
  • Day
    $30.00

  • Manufacturer: Gardner Bender Electrical Tools
  • SKU: 34-035
  • Gardner Bender's 931H easily corrects conduit over-bends.
  • All of Gardner Bender's aluminum benders come with a built-in acrylic level gauge that helps make precise bends in half the time. No guessing necessary to complete the job.
  • With the 931H head and handle come in a complete packaging with no assembly required.
  • The 931H aluminum bender bends 1/2 In. EMT, the bend radius of the bender is 5 In. and does not bend rigid piping.
  • The weight of the 931H is a 5.3 lbs with handle, making it
Rental Rates
  • 24 Hour
    $6.00
  • Half Day
    $5.00 minimum
  • Day
    $5.00

  • Manufacturer: Gardner Bender Electrical Tools
  • SKU: 34-034

Bends 1/2" to 1-1/4" EMT, and 1/2" to 1" rigid and rigid aluminum conduit.

Rental Rates
  • 24 Hour
    $6.00
  • Half Day
    $5.00 minimum
  • Day
    $5.00

  • Manufacturer: Bosch Power Tools
  • SKU: 38-012
  • Model Number: 11241EVS
  • SDS-Max® bit system tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate.
  • "Combination" dual mode selector: 2 modes of operation, rotary hammer and hammer only mode.
  • Auto-Max® dial - variable speed dial designed to automatically insure the maximum speed and power every time the tool is plugged in.
  • Constant Response™ Circuitry provides soft-start - Maintains constant speed under load - Provides overload protection.
  • Turbo™ Power delivers 20% more power in hammer only mode.
  • Service Minder™ light indicates when preventative maintenance is required.
  • Power light ensures operator that power feed is live.
  • Innovative service modules designed so a qualified service technician can quickly replace the brushes and cord.
Rental Rates
  • 24 Hour
    $60.00
  • Half Day
    $25.00 minimum
  • Day
    $45.00

  • Manufacturer: Bosch Power Tools
  • SKU: 38-065
  • Model Number: 11245EVS
  • SDS-max® bit system — tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate
  • "Combination" dual mode selector — 2 modes of operation, rotary hammer and hammer only mode
  • Variable-speed dial — for accurate bit starting and controlled chipping applications
  • Constant Response™ circuitry — provides soft-start, maintains constant speed under load, provides overload protection
  • Service Minder™ light — indicates when preventative maintenance is required
  • Vario-Lock™ positioning — rotates and locks chisel into 12 different positions to optimize working angle
  • Padded rear handle — absorbs shock for operator comfort
  • Integral clutch — helps minimize torque reaction
  • 360° Auxiliary handle — provides a wide range of movement along with operator comfort
  • Bits available for rent at store
Rental Rates
  • 24 Hour
    $70.00
  • Half Day
    $40.00 minimum
  • Day
    $60.00
Purchase Price
  • $599.00

    *RENTAL ITEM FOR SALE!!

  • Manufacturer: Bobcat
  • SKU: 50-080
  • Model Number: MT55

The MT55 boasts even more power to tackle big jobs in close quarters with impressive traction and lifting abilities. It turns quickly in its tracks, treads lightly over soft ground and lawns and provides endless work-saving opportunities using many different Bobcat attachments. Used by itself or as a complement to bigger loaders, this is one great work-saver.

Attatchments:

Trencher

Bucket

Auger- 9" 12" and 24" bits available

Rental Rates
  • 24 Hour
    $225.00
  • Half Day
    $125.00 minimum
  • Day
    $200.00
Rental Rates
  • 24 Hour
    $5.00
  • Half Day
    $5.00 minimum
  • Day
    $5.00
Rental Rates
  • 24 Hour
    $5.00
  • Half Day
    $5.00 minimum
  • Day
    $5.00

  • Manufacturer: Airlessco
  • SKU: 58-090

Great for small and medium residential and commercial projects.

Benjamin Moore pain available at store

Rental Rates
  • 24 Hour
    $95.00
  • Half Day
    $80.00 minimum
  • Day
    $80.00
Purchase Price
  • $699.00

    *RENTAL ITEM FOR SALE!!

  • Manufacturer: Rustoleum Paint
  • SKU: 58-009

Make crisp, accurate stripes with the Rust-Oleum High Performance Striping Machine. Its heavy-duty wheels work on a variety of terrains and make applying straight lines fast and easy. Just collapse the handle to take it anywhere.

Rental Rates
  • 24 Hour
    $25.00
  • Half Day
    $20.00 minimum
  • Day
    $20.00

  • Manufacturer: Schaefer Ventilation
  • SKU: 42-055
  • Model Number: Z1-12CK

Extend your patio and tent use through the cooler seasons with portable radiant heaters. The Zubri™ Z1-12CK heats approximately a 300 square foot area. No tools are necessary to assemble. Stores away in its own hard-shell carrying case. Utilizes 20 pound propane tank. For outdoor use only.

Rental Rates
  • 24 Hour
    $45.00

  • Manufacturer: Schaefer Ventilation
  • SKU: 42-024

Mounts onto tent poles, saving floor space

Wide variety of mounting options available for flexible and easy installation

Quiet operation, high efficiency and output

Easily stored and transported

 

Rental Rates
  • 24 Hour
    $35.00

  • Manufacturer: Milwaukee Tools
  • SKU: 30-015

Compact, Lightweight Design: At 10.2” long and 3.5 lbs it is the most compact & lightest grinder in the Milwaukee line

Discs available at the store

Rental Rates
  • 24 Hour
    $25.00
  • Half Day
    $20.00 minimum
  • Day
    $20.00

  • Manufacturer: Milwaukee Tools
  • SKU: 20-022

14.4-volt Ni-Cad 1/2-inch cordless driver/drill kit
High-speed (1,400 rpm) drill for fast drilling and fastening; compact for tight spaces

Plastic body, aluminum/magnesium alloy gear case, soft glass-reinforced nylon handle

9-3/8 by 9-1/8 by 3-1/8 inches

Rental Rates
  • 24 Hour
    $18.00
  • Half Day
    $15.00 minimum
  • Day
    $15.00

  • Manufacturer: American Power Pull
  • SKU: 18-045

3 Ton, Extra Heavy Duty Cable Puller With Double Line, For Stretching, Pulling Or Bracing, Equipped With 18' Of Special Flexible 5/16" Wire Cable, Tackle Block & Hook On End Of Cable, For Farms, Trucks, Oil Fields, Mining, Ship Yards, Railroads, Factories, Garages, Contractors, Utility Companies

Rental Rates
  • 24 Hour
    $20.00
  • Half Day
    $15.00 minimum
  • Day
    $15.00

  • Manufacturer: Taylor Tools
  • SKU: 08-059

Rugged chisel steel blade drives carpet into crotch on stairs installations and tackless installations. Forged hi-carbon steel, heat treated and tempered for many years of reliable service. Length: 8"

Rental Rates
  • 24 Hour
    $8.00
  • Half Day
    $6.00 minimum
  • Day
    $6.00

  • Manufacturer: Taylor Tools
  • SKU: 08-054

Taylor stretcher features a 12" head, heavy duty steel teeth and adjustable height. The four inner-outer steel tubing sections are made of a thicker gauge steel and have a larger diameter than competitors for 20% more strength and rigidity.

Rental Rates
  • 24 Hour
    $50.00
  • Half Day
    $25.00 minimum
  • Day
    $40.00

  • Manufacturer: Taylor Tools
  • SKU: 08-025

This iron includes such features as a 900 Watt heavy-duty heating element for fast heat-up, a
5-setting thermostat and a fully grooved base.
Both irons come with a heavy-duty iron tray and a 12' power cord.

Rental Rates
  • 24 Hour
    $25.00
  • Half Day
    $12.00 minimum
  • Day
    $18.00

  • Manufacturer: DeWalt Tools
  • SKU: 02-002

Portable 2 HP air compressor

Continuous 4 gallon electric air compressor

Extra air hoses available

Rental Rates
  • 24 Hour
    $50.00
  • Half Day
    $25.00 minimum
  • Day
    $40.00